TNC-A003S

Safety monitor for monitoring data transmission and the AS-i controller, for safety related applications up to SIL 3 to IEC/EN 61508, e.g. for the control of up to 4  smoke control dampers

Controller for controlling actuators and for monitoring the damper blade position and duct smoke detectors

  • Controller with TROXNETCOM Basic User Software
  • Easy and safe commissioning without programming
  • Controller with master function for stand-alone operation
  • System monitoring
  • Automatic recognition of components and their status
  • Menu-driven user interface (controller display) for system configuration
  • Peripheral equipment can be tested without additional auxiliary equipment

TNC-A003S 00134543_0
  • Application

Application

  • AS-i safety monitor TNC-A003S
  • Safety monitor for monitoring data transmission and the AS-i controller, for safety related applications up to SIL 3 to IEC/EN 61508, e.g. for the control of smoke control dampers

Technical information

  • Function
  • Technology
  • Specification text
  • Order code
AS-i safety monitor TNC-A003S 00134177_0

DescriptionTNC-A003S
Supply voltage24 V DC ± 15 %
Residual ripple< 15 %
Rated operating current150 mA
Peak switch-on current ¹⁾600 mA
Response time (safety related)< 40 ms
Power ON delay time< 10 s
AS-i profileMonitor 7.F
AS-i voltage range18.5 – 31.6 V
AS-i current consumption< 45 mA
Interface RS 2329600 Bd, no parity, 1 start bit, 1 stop bit, 8 data bits
Start inputOptocoupler input (high active), input current approx. 10 mA (24 V DC)
Contactor control inputOptocoupler input (high active), input current approx. 10 mA (24 V DC)
Safety ON message output ²⁾PNP transistor output, 200 mA, short circuit and reverse voltage protection
Safety outputVolt-free NO contacts, max. contact load: 1 A DC-13 at 24 V DC, 3 A AC-15 at 230 V AC
FuseExternally, with 4 A MT max.
Overvoltage category3, for rated operating voltage 300 V AC to VDE 0110 part 1
Operating temperature–20 to 60 °C
Storage temperature–30 to 70 °C
Protection levelIP 20 (only for use in rooms where electric systems operate/switch cabinet with minimum IP 54)
MTTFd57 years
Distance between 2 AS-i safety monitors10 mm
Casing dimensions45 × 105 × 120 mm
Casing materialPolyamide PA66, black
FixingOn DIN mounting rail

¹⁾ When all relays are switched on simultaneously; current for message outputs not taken into consideration

²⁾ The Safety ON message output is not safety related


Standard description (characteristics)

Safety monitor for monitoring data transmission and the AS-i controller, for safety related applications up to SIL 3 to IEC/EN 61508, e.g. for the control of up to 4  smoke control dampers

  • Supply voltage: 24 V DC ±15 %
  • AS-i voltage range: 18.5 – 31.6 V
  • AS-i current consumption: < 45 mA
  • Operating temperature: –20 to 60 C°
  • Protection level: IP 20 (only for use in rooms where electric systems operate/switch cabinet with minimum IP54)
  • Make: TROX GmbH or equivalent
  • Type: TNC-A003S

00131013_0
 

 Component
TNC-A1305       Controller with PROFIBUS DP interface; 1 master
TNC-A1306       Controller with PROFIBUS DP interface; 2 masters
TNC-A1353       Controller with Modbus/TCP interface; 1 master
TNC-A1354       Controller with Modbus/TCP interface; 2 masters
TNC-A1375       Gateway with PROFIBUS DP interface; 1 master
TNC-A2225       Repeater
TNC-ZB0252       AS-i safety gateway
TNC-Z0119       Passive bus termination
TNC-A1146       AS-i tuner (diagnosis module)

 

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265